Re-evaluating everything!

-
So this week we made sure that all of our analyzed FTIR information is organized in our drives, which I will share more conclusive what we found more later on. Our team is trying to apply for an ASU symposium at Tempe and we had to work on our abstract and update it with more accurate information since we listed future studies and now we already have started those "future studies so they are not really considered in the future since we have already started and do have preliminary data and we can talk about it. So our abstract has changed quite a bit after modifying it.
Also, since we have new people added to our team we showed David how to alcohol treat and dry these disks under the hood. We believe that since we go in and out a lot out of these plates, there might be some contamination so we decided to retreat them with alcohol and use this time to show some of the new additions how this procedure was done. This was done on 2/22/19 and before the plastics were treated, I put each plastic type on a TSA plate to test if there was any contamination before treatment. The only one that really showed contamination was Plastics #4, and it also did show some mold, which looks really scary looking and interesting. Plastic #3 and #5 were fine but it is a good we decided to retreat them because there indeed was some contamination in plastic #4.

Comments

Post a Comment

Popular posts from this blog

Prepping Everything First!

-
Image
Before the spring break started the goal was to get a set of fresh new plastics treated and disinfected. So the Friday before the spring break we grated as much plastic as possible, and we even had some people donate some plastics for our project because the drill we used was having some issues. We then drained them in 100% isopropanol and let them air dry inside the hood to allow them to be ready for after the break. When we came back the plastics were then tested on PIA plated to see if there was any contamination in them before we could start the incubation process. Plastic #3 did show signs of slight contamination so they were treated one more time to see if we could get rid of it and actually start our next step next week.
Read more

Bio Science Conference at the Convention Center!

-
Image
I am excited to say that Maria and I will be attending this Arizona Industry Association conference on October 3rd. Thanks to the recommendation by Dr. Cotter we decided to give this conference a shot, and sure enough, we were accepted got the email confirming our attendance. This will be the first conference we will be attending for the year, so we are going to dedicate some time to practice our presentation and to get more familiar with speaking in front of crowds of people again. I am really excited to be attending this conference and to see what kind of research other people are doing around the valley. It should be a good learning experience for us.
Read more

Hard Work Pays Off! 2018 WAESO this week!

-
Image
Fig. 1 One of the images that was edited and placed in our posters. It shows the bacteria I was working on which is Pseudomonas aeruginosa,  When I left school Friday afternoon I thought I was going to have a regular easy going weekend. Usually, on my weekends I work from 7am to 3pm, so my whole morning is occupied working. With just a few days away from the 2018 WAESO Conference there was a lot of preparing to do for our posters Like I was saying I thought the posters were all set for the conference... I thought wrong. During the week there was so much editing to do with the posters. Every little tedious detail had to be just right, and that is what made this project a little harder. Do not get me wrong, in the end when I looked at the final edition of what was going to be printed the team and I felt so proud! All of our hard work finally paid off! Now I have to start preparing for my presentation, for the actual conference on Friday! Exciting!!
Read more